SPECIFICATIONS
TK-260G/360G Portable |
| General Specifications | TK-260G |
TK-360G |
| Number of Channels | Max. 8 |
|
| Frequency Range | 150-174 MHz | 450-470 MHz |
Channel Spacing Wide/Narrow |
25, 30 kHz/ 12.5, 15 kHz |
25 kHz/ 12.5 kHz |
| PLL step | 2.5, 5, 6.25, 7.5 kHz |
5, 6.25 kHz |
| Channel Frequency Spread | 24 MHZ |
20 MHz |
| Antenna impedance | 50 ohms |
|
| Operating Voltage | 7.5 V DC +/- 20 % |
|
| Ambient Temperature Range | -30°C to +60°C |
|
| Frequency Stability | ± 3 ppm |
± 2.5 ppm |
Battery Life (5-5-90 duty cycle with battery saver off) with KNB-14 (600mAh) with KNB-15A (1100mAh) |
More than 4 hours More than 8 hours |
|
| Audio Output Impedance | 4 ohms |
|
| Dimensions (W x H x D) | (2-5/16) x (5- 5/16) x (1 1/4) in |
|
| Weight | 0.88 lbs (400 g) with KNB-14 battery and antenna |
|
| FCC ID | ALH29463110 | |
| FCC Compliance | FCC parts 22, 74, 80, 90, 95 | |
| IC Certification | 28219551A | 282195580A |
| Receiver Specifications | Measurements made per EIA standard EIA-RS 316B |
|
Sensitivity (12 dB SINAD) Wide/Narrow |
0.25 µV / 0.28 µV |
|
Selectivity Wide/Narrow |
70 dB / 60 dB |
|
Intermodulation Distortion Wide/Narrow |
65 dB / 60 dB |
|
Spurious Response |
70 dB |
|
Audio Output |
500 mW at less than 10% distortion |
|
| Transmitter Specifications | Measurements made per EIA standard EIA-RS 316B |
|
| RF Power Output (Hi/Low) | 5W / 1W |
4W / 1W |
| Spurious & Harmonics | 70 dB |
|
Modulation Wide/Narrow |
16KoF3E / 11KoF3E |
|
FM Noise Wide/Narrow |
45 dB / 43 dB |
45 dB / 40 dB |
| Modulation Distortion | Less than 5% |
|
Military Standards 810 C/D/E |
||
Method 506.1, Procedure 2 |
Method 507.3, Procedure 2 Method 510.2, Procedure 1 |
Method 514.3, Procedure 1 |
| Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice. | ||
Copyright 2002 Guru Service Organization